How to Block Access to a Specific Domain
All routers are different, and yours may or may not have the ability to set up router parental controls in an access restrictions section. Here is the general process for creating an access control policy to block your child’s access to a site. The router may need to reboot to enforce the new rule. It may take several minutes.
How to Test the Blocking Rule
To see if the rule is working, go to the site you blocked. Try accessing it from your computer and from a couple of the devices your child uses to access the internet, such as an iPad or game console. If the rule is working, you should see an error when you attempt to access the blocked site. If the block isn’t working, check your router manufacturer’s website for troubleshooting help.
How to Log in to Your Router’s Administrative Console
Most consumer-grade routers feature setup and configuration via a web browser. To access your router’s configuration settings, you usually need to open a new browser window on a computer and enter the router’s address. This address is typically a non-routable IP address that can’t be seen from the internet. Examples of a typical router address include http://192.168.0.1, http://10.0.0.1, and http://192.168.1.1. In addition to the address, some routers require connecting to a specific port to access the administrative console. Append the port to the end of the address if required by using a colon followed by the port number. After you enter the correct address, you’re prompted for the administrator username and password. The default username and password should be available on the router maker’s website. If you changed it and can’t remember it, you may have to reset your router to its factory defaults to gain access via the default admin login. This is usually done by holding down a small reset button on the back of the router for 30 seconds or more, depending on the router’s brand.
